A resource for the current Sunrocket Gizmo Administrator Passwords for the AC-211-SR, AC-211-N, Innomedia, and Linksys Gizmos. This blog also contains instructions on unlocking and reconfiguring your Gizmo for use on other VoIP providers, now that SunRocket has shut down. If you have any suggestions or new how-to's that you would like included on this site, please email me at sunrocket@nukedgallery.net.
This p/w didn't work on my Linksys adapter - minus the Space and dot, I suppose. Maybe I took a wrong approach. I got to the p/w prompt via Advanced\System. Does anyone have a different one? Thanx.
This p/w didn't work on my Linksys adapter - minus the Space and dot, I suppose. Maybe I took a wrong approach. I got to the p/w prompt via Advanced\System. Does anyone have a different one? Thanx.
Here's the instructions I used for my Sunrocket Linksys adapter. I found these on sunrocketforums.com, and they worked for me. Whoever is running this blog should publish these as a new entry (rather than a comment) because I know a lot of people are looking for this info. Like I said, I can't take credit for this, I'm just trying to help everyone like me who got shafted by SR.
On the Linksys, web admin access is disabled. To enable it, pick up phone, dial **** then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save. Then, go to http://192.168.0.1/admin/voice/advanced , login with: User: admin Password: 7UprUtew Note - The user name is admin not Admin - it's case sensitive.
If the gizmo is behind your router, you also need to enable access from the WAN side with option 7932# , set to 1# and press 1 to save. Of course, substitute gizmo WAN/DHCP address in above URL. To hear what it is, use option 110# .
I tried the last instruction, with the PW of 7UprUtew. didn't work, because i'd used the IVR menu to factory reset the unit (sigh). Now I have to try the OTHER password when I get home. Thanks for helping!
ok these directions are only good after you get new service with a more reliable provider now that sr has given us all the gizmo shaft. i hope they all die with crotchrot. am i correct you need to be with a voip provider before changing to these directions. please clue me in.
8 comments:
Linksys ATA default password is 0rLhnT34vBg2SqwbSoDyGslvF .
It will only work after a factory reset or if the ATA has never been provisioned.
It will only work until you connect back up to Sunrocket.
Linksys ATA default password is 0rLhnT34vBg2SqwbSoDyGslvF .
It will only work after a factory reset or if the ATA has never been provisioned.
It will only work until you connect back up to Sunrocket.
This p/w didn't work on my Linksys adapter - minus the Space and dot, I suppose. Maybe I took a wrong approach. I got to the p/w prompt via Advanced\System. Does anyone have a different one? Thanx.
This p/w didn't work on my Linksys adapter - minus the Space and dot, I suppose. Maybe I took a wrong approach. I got to the p/w prompt via Advanced\System. Does anyone have a different one? Thanx.
Here's the instructions I used for my Sunrocket Linksys adapter. I found these on sunrocketforums.com, and they worked for me. Whoever is running this blog should publish these as a new entry (rather than a comment) because I know a lot of people are looking for this info. Like I said, I can't take credit for this, I'm just trying to help everyone like me who got shafted by SR.
On the Linksys, web admin access is disabled. To enable it, pick up phone, dial **** then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save.
Then, go to http://192.168.0.1/admin/voice/advanced , login with:
User: admin
Password: 7UprUtew
Note - The user name is admin not Admin - it's case sensitive.
If the gizmo is behind your router, you also need to enable access from the WAN side with option 7932# , set to 1# and press 1 to save. Of course, substitute gizmo WAN/DHCP address in above URL. To hear what it is, use option 110# .
I tried the last instruction, with the PW of 7UprUtew. didn't work, because i'd used the IVR menu to factory reset the unit (sigh). Now I have to try the OTHER password when I get home. Thanks for helping!
ok these directions are only good after you get new service with a more reliable provider now that sr has given us all the gizmo shaft.
i hope they all die with crotchrot.
am i correct you need to be with a voip provider before changing to these directions. please clue me in.
I was able replace "admin" with "user" for the WEB
User: user
Password: 7UprUtew
but still have not been able to get the sequence dial **** then 723646# , when asked for password, dial 78778839# to work
.. my voice sez "invalid password" ....any thoughts?
Post a Comment