New Innomedia Password?

When trying to log in as admin to your Innomedia box, try:
Username: Admin
Password: password

Upgrading Linksys Firmware

From DSLR:

On the Linksys, web admin access is disabled. To enable it, pick up phone, dial **** then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save.
Then, go to »192.168.0.1/admin/voice/advanced , enter user and password.

If gizmo behind router, you also need to enable access from WAN side with option 7932# . Of course, substitute gizmo WAN address in above URL(Important part... I had to use the IP my router assigned my ATA to access it). To hear it, use option 110#, when asked for value dial 1# then dial 1 to save

User:admin
Password:7UprUtew
just turn off provisioning (or set up to provision from new provider) and be careful not to do a factory reset since thus far nobody knows the default SunRocket password.

I then changed the password on the advanced system page.

I also removed the Configuration Profile/Profile Rule: string from the provisioning page along with the Firmware Upgrade/Upgrade Rule: string (so no provisioning would happen and allows me to leave firmware upgrade/provisioning enabled).

Next I went to the linksys support page and downloaded the firmware update.

I followed this by extracting the update and running it.

Finally I entered the IP my router assigned the SPA with my admin password I created, and started the flash it took ~90sec and the ATA rebooted.

I then logged back into the ATA with the IP from last part and looked over the settings.

WORKING Net2Phone firmware for Innomedia..rebrands to OEM

This was provided to a sunrocketforum.com member by net2phone techs. It's a working version (as opposed to the non-working firmware they currently have posted). I would skip the step in the how-to documentation about "Reset to Defaults" to see what happens, as if you do reset to defaults after Net2phone firmware, it will configure it for Net2phone. But, you can always change it.

Actual file here: »sunrocketforum.com/download.php?id=82

Actual thread here with screenshot of the firmware after flashing:

»sunrocketforum.com/viewtopic.php···82#15882

I'm assuming this will show up soon on the Net2phone Sunrocket page, but for now, there ya go.

How to Find Out Who Owns Your Number

This link will let you know which CLEC controls your number:

»nextelonline.nextel.com/NASApp/w···guage=EN

1. Fill in appropriate info

2. Click Yellow "Check Eligibility" Link

3. If eligibility is "YES" then checkmark your number

4. Select "Continue" and there will be your CLEC, (e.g. Level-3, Global Crossing, etc...)

Now, go sign up with another provider like ViaTalk or Vonage and get your VoIP on ;)

Password Problems

It seems as though TeleBendOverAndTakeItUpTheAss has reconfigured any Gizmos that don't have autoconfiguration/provisioning disabled, and changed the password to something that we haven't figured out yet.

I sent an email to TB this afternoon asking for the passwords, and will post the reply here when I get one.

Unlocking your Gizmo(Linksys SPA2102) to work with ViaTalk

EDIT: Updated based on feedback. The step in bold text is what has been changed.

From http://itrealm.blogspot.com/2007/07/unlocking-your-gizmo-to-work-with.html :

As promised, here are the directions to unlocking your gizmo(Lynksys SPA-2102 VOIP Router) to work on ViaTalk's servers.

Step 1: Enable web access (perform functions on home phone)
1. dial ****
2. dial 723646#
3. dial 78778839#
4. dial 1#
5. dial 1 to save


Step 2: Remove access restrictions
1. Go to 192.168.0.1/admin/voice/advanced
2. Enter admin for user and 7UprUtew for password
3. Click on system. Delete the contents of Restricted Access Domain so that it is blank.
4. Hit Submit all changes.

Step 3: Load updated firmware
1. Go to http://itrealm.net/spa2102-5.1.9.zip (or from Linksys support) and download to desktop
2. Right click on zip file, extract here.
3. Double click on upg-spa2102-5-1-9.exe
4. Enter 192.168.0.1 for IP hit ok
5. Enter password 7UprUtew hit ok
6. Router stats are displayed, hit upgrade.
7. Hit ok to close utility.

Step 4: Configure Gizmo
1. Go to 192.168.0.1/admin/voice/advanced
2. Enter admin for user and 7UprUtew for password
3. Click on Line1.
4. Change proxy to the server name provided by viatalk.
5. Change outbound proxy to the server name provided by viatalk.
6. Change display name to whatever you wish.
7. Change password to the password that was provided by viatalk.
8. Set use auth id to yes, and set the auth ID text field to your phone number.
9. Set user id to your new viatalk phone number. Don't forget the '1' at the beginning.
10. Click submit all changes to save your settings.
11. Click on provisioning.
12. Delete the contents of both profile rule and upgrade rule so they are blank.
13. Click submit all changes to save your settings.
14. Click on Router.
15. Click on WAN Setup.
16. Change primary ntp server to north-america.pool.org(or pick a different time server from ntp.org)
17. Change secondary ntp server to pool.ntp.org (or pick a different time server from ntp.org)
18. Click submit all changes to save your settings.

All done. You should see your phone settings light up.

Important Notice for Sunrocket Customers Porting To ViaTalk

This was just brought to my attention in the ViaTalk forums at DSLR:
1. ViaTalk does NOT have a method to import your Sunrocket contact list (ie, you can't save it off as a CSV file and import it).
2. If you are using the Custom Caller ID feature in ViaTalk for your incoming/outgoing calls, you will have to re-enter all that information if/when your SunRocket number gets ported to ViaTalk.

Configuring 2 lines with Innomedia MTA6328-2re & Viatalk

From http://gandhi.wordpress.com/2007/07/19/configuring-2-lines-with-innomedia-mta6328-2re-viatalk/ . Presumably the same could be done for the other Gizmos as well.

Adam Nollmeyer commented on my previous post about the 2-line feature offered by Viatalk. I tried it out, and I am glad to report that I have a step-by-step guide on how to get this working.

Before I start - one caveat: for me, line 2 seems to take precedence over line 1. In other words, when someone calls me, the phone connected to line 2 rings, but the phone connected to line 1 does not! Same thing happens for call waiting - only line 2 gets the call. However, I am able to make calls from both lines simultaneously. This may be a Innomedia issue, but I am not certain.

Anyways, here is the step-by-step:

Step 1: Enable line 2 on the Sunrocket/Innomedia MTA6328-2re Gizmo.

a) Enabling the 2nd line is not available via the web interface - it is only available from telnet. Telnet to 192.168.251.1 (in windows, you can do this by going to START -> Run. Type in “telnet 192.168.251.1″ and click OK)


b) Log in using the username ‘admin’ (all lower-case) and password ‘7UprUtew’ (case-sensitive).

c) Type in ‘Mp’ (without quotes, case-sensitive). This option will allow you the configure the phone ports.

d) Follow the on-screen prompts to enable both the ports. When prompted whether you want to save the configuration permanently, select ‘y’.

e) Power-cycle the gizmo by unplugging the power cord, wait 20 seconds, and plug the power cord back in the gizmo. At this point, your gizmo should have both lines up and running.

Step 2: Configure the second line

a) Go to http://192.168.251.1/Voice_adminPage.htm and login using ‘admin’ and ‘7UprUtew’ as the username and password respectively.

b) From the menu bar, go to VoIP -> User Account. For line 1, your ‘username’ must be set to your 11-digit phone number (starting with country code 1). The password was sent to you by viatalk in the activation email. All other fields must be blank (user name, authentication ID, Hot Phone number). Select ‘No’ for the ‘Use hot phone number’ option, and ‘Yes’ for the ‘Fax T38′ option. Click the “Save” button.


c) Repeat step (b) above for line 2 and click the “Save” button.

Step 3: Reboot/Reset/Power-cycle everything

a) Power cycle your cable modem

b) Power cycle your gizmo (If the gizmo is behind a router, then power cycle the router, then the gizmo)

c) Power cycle the phone connected to Line 1

d) Power cycle the phone connected to Line 2

Now everything should be working! Try it out and let me know how it works. One forewarning: For the first few calls, both my phones were ringing. This issue auto-corrected it self after a few calls. So if this happens to you, just wait 10 minutes or so and try again.

ENJOY!

Gizmo + Grand Central + Gizmo Project = Free Phone

First, sign up for the Gizmo Project at www.gizmoproject.com, which is free. That gives you a SIP account, which is the protocol VOIP phones use. Basically, it allows you to chat with other online instant messengers, but it also has SIP capabilities.

Then, configure your gizmo with the Gizmo Project servers since the gizmo uses the SIP protocol to communicate.
http://support.gizmoproject.com/index.php?_a=knowledgebase&_j=questiondetails&_i=88

Then, configure Grand Central to forward all your calls to your Gizmo Project account.
blog.grandcentral.com/?p=72

Then, configure your Sunrocket account to forward all calls to your Grand Central number.

Now, when people call either your old Sunrocket number or your new Grand Central number, it goes to your gizmo, which rings your normal home phone. All incoming calls are free.

If you want to make an outgoing call, you can either pay $0.019 per minute, or you can do it for free (only during Grand Central's beta period) by going to your Grand Central account and adding someone to your address book and clicking the "call" button. This makes Grand Central call the person and calls your phone to connect the two, so it counts as an incoming call. So, you can make all outgoing calls for free.

Getting BroadVoice set on a sunrocket SPA-2102

Before you do this you will need to A) enable ADMIN access on the Spa, and B) log into the device.

A) from »clipmarks.com/clipmark/2F6C6E56-···1E44F87/

Unlocking a Linksys SPA2102-R

On the Linksys, web admin access is disabled.

To enable it, pick up phone, dial * * * * then 723646# , when asked for password, dial 78778839# , when asked for value dial 1# then dial 1 to save.

Then, go to »192.168.0.1/admin/voice/advanced , enter user and password.

If gizmo behind router, you also need to enable access from WAN side with option 7932# . Of course, substitute gizmo WAN address in above URL. To hear it, use option 110#.

B) Once logged in click on Admin Login then Advanced. Once the page comes back click on VOICE then LINE 1 (or 2). Images follow (click for full size):

TeleBlend Update

I'm a man, I can admit when I'm wrong. It appears that TeleBlend is one of the "preferred" providers according to the Sunrocket email. I still find it odd that they don't have any corporate information online, that their domain is less than a week old, that their TOS is a copy/paste of Sunrocket's, and that their support phone number is the same as Sunrocket's.

BUT, since Sunrocket has named them as an alternative, and there are reports on DSLR about success with them, they might not be all evil (just a little evil). Anyway, use them at your own risk. I still recommend established providers like Vonage, ViaTalk, and others.

WARNING!!! TeleBlend VoIP Service

DSLReports users have reported that a company called "TeleBlend" has been selected as one of the "official" Sunrocket replacements. However, a quick look at their website's WHOIS information shows that the domain was registered just yesterday:

Registrant:
Network Operations
520 E Zarragossa Street
Pensacola, Florida 32502
United States

Registered through: GoDaddy.com, Inc. (http://www.godaddy.com)
Domain Name: MYTELEBLEND.NET
Created on: 17-Jul-07
Expires on: 18-Jul-09
Last Updated on: 17-Jul-07

Administrative Contact:
Operations, Network domreg@overgroup.com
520 E Zarragossa Street
Pensacola, Florida 32502
United States
(850) 470-5502

Technical Contact:
Operations, Network domreg@overgroup.com
520 E Zarragossa Street
Pensacola, Florida 32502
United States
(850) 470-5502

Domain servers in listed order:
NS51.DOMAINCONTROL.COM
NS52.DOMAINCONTROL.COM

Whois Server Version 2.0

Domain names in the .com and .net domains can now be registered
with many different competing registrars. Go to http://www.internic.net
for detailed information.


Domain Name: MYTELEBLEND.NET
Registrar: GODADDY.COM, INC.
Whois Server: whois.godaddy.com
Referral URL: http://registrar.godaddy.com
Name Server: NS51.DOMAINCONTROL.COM
Name Server: NS52.DOMAINCONTROL.COM
Status: clientDeleteProhibited
Status: clientRenewProhibited
Status: clientTransferProhibited
Status: clientUpdateProhibited
Updated Date: 18-jul-2007
Creation Date: 18-jul-2007
Expiration Date: 18-jul-2009

I would be extremely cautious about this company as they just popped up on the VoIP radar. Their SSL certs do not appear to be verified in Firefox. Even scarier, it appears that they have the complete SunRocket subscriber database. If you go to the Signup page and enter your number, they've got your name and address. My advice: stay away.

ATS E6501S (sold at Staples) Instructions

Here are the passwords:

Login: user/welcome - Regular user login that changes router settings
Login: tech/kaboom - Administrative that also adds voice changes

ATS Configuration Location: Voice > Basic

DID: (New phone number)
Display Name: (Your choice - not needed)
SIP Name: (New phone number)
SIP Password: (New password)
Proxy Server Address: (New SIP address)
Proxy Server: 5060 (default)
Registrar Server Address: (New SIP address)
Registrar Server Port: 5060 (default)
Registrar Address of Record: (blank - default)
Registration Retry Interval(s): 60 (default)
Outbound Proxy Address: (Provided by your new provider, might just be the SIP address)
Outbound Proxy Port: 0 (zero - default)
Dial Plan: (Probably safe to leave as-is)
Digit Timer: 5000 (default)

Using your Gizmo with other providers

My only experience here has been moving the Innomedia and AC-211 Gizmo's (Linksys is forthcoming) over to ViaTalk. However, I believe that the process should be similar, if not the same for other providers. They will provide you with a phone number, username, password, SIP server/port, and possibly CODEC information. Follow the instructions here and you should be able to use your Gizmo with just about any provider you want.

WARNING!!! Class Action Lawsuit Page

There is a post on DSLReports.com with a link to a SunRocket Class Action Lawsuit page. The page is supposedly "maintained by the law firm handling the class action", however they do not identify themselves anywhere on the page. Further, the WHOIS locator for the domain reveals an anonymous (private) registration:

Registrant:
Domains by Proxy, Inc.

DomainsByProxy.com
15111 N. Hayden Rd., Ste 160, PMB 353
Scottsdale, Arizona 85260
United States

Registered through: GoDaddy.com, Inc. (»www.godaddy.com)
Domain Name: SUNROCKETCLASSACTION.COM
Created on: 17-Jul-07
Expires on: 17-Jul-08
Last Updated on: 17-Jul-07

Administrative Contact:
Private, Registration SUNROCKETCLASSACTION.COM@domainsbyproxy.com
Domains by Proxy, Inc.
DomainsByProxy.com
15111 N. Hayden Rd., Ste 160, PMB 353
Scottsdale, Arizona 85260
United States
(480) 624-2599 Fax -- (480) 624-2599

Technical Contact:
Private, Registration SUNROCKETCLASSACTION.COM@domainsbyproxy.com
Domains by Proxy, Inc.
DomainsByProxy.com
15111 N. Hayden Rd., Ste 160, PMB 353
Scottsdale, Arizona 85260
United States
(480) 624-2599 Fax -- (480) 624-2599

Domain servers in listed order:
NS1.WEBSOLVENTS.COM
NS2.WEBSOLVENTS.COM

Registry Status: clientRenewProhibited
Registry Status: clientTransferProhibited
Registry Status: clientUpdateProhibited
Registry Status: clientDeleteProhibited

The signup form requests your email address, SunRocket account number, and other sensitive personal identification material. My recommendation at this point is to not give any information to this site, as the operators are unknown.

Unlocking a Linksys SPA2102-R

On the Linksys, web admin access is disabled.

To enable it, pick up phone, dial * * * * then 723646# , when asked for
password, dial 78778839# , when asked for value dial 1# then dial 1 to
save.
Then, go to »192.168.0.1/admin/voice/advanced , enter user and password.

If gizmo behind router, you also need to enable access from WAN side
with option 7932# . Of course, substitute gizmo WAN address in above
URL. To hear it, use option 110#

Do NOT do a factory reset.

Innomedia for ViaTalk

From http://www.dslreports.com/forum/r18692448-VERIFIED-guide-use-Innomedia-Gizmo-on-ViaTalk-

1. Disconnect your WAN port from the gizmo
2. Open your browser (I used IE - cannot verify if it will work with any other browser). Go to »192.168.251.1/Voice_adminPage.htm - the IP Address will verify if you changed the default settings in the gizmo. If so, use that address, but DO NOT FORGET the /Voice_adminPage.htm at the end.
3. Login using your admin password. If you do not know the password, try one available at »gizmopasswords.blogspot.com
4. Turn off provisioning if you have not done this already. To do this, go to NETWORK -> Provisioning setting. Uncheck the "Enable Provisioning" box and hit the "Save and Reboot" button. After rebooting, you may not be able to login to the admin account since the reboot will default to index.htm. Hit CANCEL, and go to »192.168.251.1/Voice_adminPage.htm to login.
5. Go to VOIP -> SIP Proxy and enter these settings:
1. SIP Proxy - Enter exactly what was sent in your email from ViaTalk. Remove any whitespaces at the end.
2. Check "Use Outbound Proxy" box
3. SIP Local Signaling Port: 5060
4. SIP Domain:
5. Registration Expiration time: 60
6. Preferred Codecs List: PCMU/8000
7. Choose "NONE" for all others.
8. Click "Save" button.
6. Go to VOIP -> User Account.
1. Choose Line 1 from dropdown
2. User ID: Your 11-digit phone number from email (starting with country code 1)
3. Password: From email
4. User Name: Same as User ID above
5. Authentication ID:
6. Use Hot Phone Number: NO
7. Hot Phone Number:
8. Use T38 FAX: Yes
9. Click "Save" button
   

Reboot your cable/dsl modem, then reboot your gizmo, and power-cycle your phone (if it is a powered phone). ENJOY!!

Check under the "information" to see if line 1 is registered

Note that when the port of your SR number to ViaTalk is complete, you'll need to use your SR number in place of your ViaTalk number in these configs.

ViaTalk SUCCESS!! (AC-211)

I got my new (temporary) ViaTalk number, unlocked my AC-211, and put in their info. I've got my SR number forwarding to my ViaTalk number, so I don't have to give out the temp number for the duration of the porting period. For those of you who are using the AC-211, here are the settings you need:

1. Under the "SIP" menu, use whatever server they give you as the primary server, port 5060.
2. For the Line 1 entry on the SIP screen:
1. The User/Phone number AND Authentication Name are the phone ViaTalk gives you.
2. The password is the one ViaTalk gives you.
3. Next, click the "Line 1" tab.
4. Change "Send out of band telephone events" to RFC 2833. Payload value is 101. Do this for the Line 2 tab as well.
3. Next, click the CODECS menu.
1. For both lines, use G711U.

Oh, and disable autoconfiguration

Note that when the port of your SR number to ViaTalk is complete, you'll need to use your SR number in place of your ViaTalk number in these configs.

Innomedia Gizmo bricked? Try this!

First a disclaimer - I have NOT tried this, but found this info on sunrocketforum.com - I turned off provisioning last night when the u7... password was working. Try this and see if it works. Please remember - DO NOT STAY CONNECTED ON THE NET when you do this until you have turned off provisioning on your innomedia.

Sorry, I do not have matching information for the Linksys and SPA adapters... if someone does, please post it in this thread.

Here are some instructions for setting up an InnoMedia gizmo manually, from scratch, in this case using a server on an alternate port.

1. Unplug cable from gizmo WAN port (so you are disconnected from Internet).

2. With PC connected to gizmo LAN port, go to »192.168.251.1 , log in with user and welcome.

3. Open this URL: »192.168.251.1/restore2.ssi ; after about 15 seconds you should see a message about reset to defaults. Wait another 30 seconds.

4. Close browser window. At this point your gizmo should be in the same state as when SR first shipped it to you.

5. Open a new browser window, go to »192.168.251.1/Voice_adminPage.htm (do not open gizmo home page first).

6. When prompted for password, use user: admin and password: slapshot

7. Go to IP Network->Provisioning Setting. Uncheck Enable Provisioning. Click Save & Reboot. Click OK to warning.

8. When prompted, log in again with admin and slapshot . If you have trouble, close window, open another, go to »192.168.251.1/Voice_adminPage.htm

9. Gp to IP Network->Interface Setting. Re-enter your static IP or PPPoE information, if needed. Click Save & Reboot. Click ok to warning.

10. Reconnect gizmo WAN cable. WAN light should come on, and your Internet connection should be working again. Of course, VoIP will still be out.

11. Log into gizmo again as admin. Go to VoIP->SIP Proxy. SIP Proxy will show as 0.0.0.0 ; change to 72.165.163.34:10560

12. In Preferred CODECs List, change 2nd entry from G729A/8000 to NONE. Click Save; Click OK to warning.

13. Go to VoIP->User Account. Enter your data for User ID, User Password, Confirm Password, User Name, Authentication ID.
Note: User ID and User Name are your 10-digit SR Phone number. Authentication ID is 15 digits. Password is 24 characters. The quotes are not part of the password, but the two equal signs at the end are. You should paste this data into both the User Password and the Confirm Password fields, as entering it manually is very error prone.

14. Set Enable T38 FAX to No. Click Save. Click OK to warning.

15. Go to Management->Reboot. Click OK to warning.

16. With luck, you should get a VoIP light within one minute.

Notes to other users who may try this:
If your SIP password contains one or more + characters, there is a bug that prevents you from entering it via the Inno web interface; use telnet instead (Cu command).
If you are in the US, note that this setup will not receive updates from SR; your service may stop working if a critical update is pushed, until you make it manually. Be sure that you have a reliable alternate means of making an emergency call.

(Thanks to http://www.dslreports.com/forum/r18689803-Innomedia-Gizmo-bricked-Try-this)

Master password for ALL Gizmos

If you have the Innomedia and can't get this to work, try this link.

According to a reputable source:

For all 3 gizmos:

1-- AC-211, AC-211n

2-- INNOMEDIA (MTA-6329, MTA-6329re)

3-- LINKSYS (SPA-2102)

the master logins are:

USER: admin

PASSWORD: 7UprUtew

If the login screen doesn't ask for a username (like the AC-211), just input the password.